Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Where is the fuse box located in the Toyota Aygo?

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Fuse box
Operation: Where is the fuse box located in the Toyota Aygo?

If you want to find out where the fuse box of your Toyota Aygo Mk1 is located, just pay attention to the instructions in the following mini guide and put into practice what is described. First of all, go inside the car and make sure it is turned off. Immediately after, unscrew the screws on the two sides of the steering wheel with a crosshead screwdriver and remove the plastic covers. At this point, locate the fuses on the left side of the steering wheel. Before performing any maintenance on them, remember to disconnect both poles of the battery.


Posted on 3 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Aygo 2014-2023 - Where is the fuel pump relay located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - Where is the fuse box located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - What is the location of the Toyota Aygo fuse box? Read Answer
    • Aygo 2014-2023 - Location of Toyota Aygo fuses? Read Answer
    • Aygo 2014-2023 - Where are the fuses located on Toyota Aygo? Read Answer
    • Aygo 2005-2014 - Where are the Toyota Aygo fuses located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos