Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signals on the Mirrors of a Toyota Camry?

Model: Toyota Camry Xv40 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side marker bulb

See other generations:
Video tutorial

As shown in this tutorial, replacing the side turn signals on the mirrors of a Toyota Camry is a very simple and quick task. First, ensure the key is not in the ignition, then carefully pry off the mirror cap using a plastic trim tool to avoid leaving marks.

At this point, remove the turn signal, gently twist the bulb counterclockwise to extract it, and insert the replacement bulb without touching the glass directly with your bare hands. Finally, follow the reverse procedure to reassemble everything.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Camry
How to Reset the Service Light on the Toyota Camry
Toyota Camry (2018-2024 / Xv70) In this guide, you will learn how to reset the oil change service light on the Toyota Camry. First, get inside the vehicle and start the engine. Then…
How to Replace the Front Turn Signal Bulb of the Toyota Camry XV50
How to Replace the Front Turn Signal Bulb of the Toyota Camry XV50
Toyota Camry (2011-2019 / Xv50) If one of the front turn signals on your Toyota Camry XV50 has suddenly stopped working and you are wondering how to replace it yourself, just follow…
How to Remove the Radio from a 2009 Toyota Camry
How to Remove the Radio from a 2009 Toyota Camry
Toyota Camry (2006-2013 / Xv40) If you own a 2009 Toyota Camry and plan to remove the factory radio yourself, read the following steps carefully and then put them into practice. Fir…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos