Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Turn Signal Bulb of the Toyota Camry XV50

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Headlight bulb

If one of the front turn signals on your Toyota Camry XV50 has suddenly stopped working and you are wondering how to replace it yourself, just follow this guide. First, lift the hood, then ensure the engine is cool and focus on the back of the headlight. At this point, remove the bulb holder by hand, then replace the burnt-out bulb with a new one and reattach the bulb holder. Finally, close the hood of the car, and you are done.

Posted on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Toyota Camry.
How to replace the headlight bulb of the Toyota Camry.
Toyota Camry (2011-2019 / Xv50) If you intend to replace the headlight bulb of your Toyota Camry by yourself but don’t know how to do it, you just need to follow the procedure below…
How to Replace the Outside Mirror on the Toyota Camry XV50
How to Replace the Outside Mirror on the Toyota Camry XV50
Toyota Camry (2011-2019 / Xv50) Let's see in this video how to remove and replace the outside mirror on the Toyota Camry XV50 in simple steps. First, open the front door and start b…
How to replace the front headlight bulb of the 2014 Toyota Camry
How to replace the front headlight bulb of the 2014 Toyota Camry
Toyota Camry (2011-2019 / Xv50) Replacing the front headlight bulb of your Toyota Camry (2014) is a very simple operation to perform. All you have to do is carefully read the follow…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos