Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to disassemble the front bumper of the Toyota Yaris.

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Front bumper
Operation: How to disassemble the front bumper of the Toyota Yaris.

In this short and simple guide, we will see the main steps that will allow us to disassemble and replace the front bumper of the Toyota Yaris. First of all, we open the hood of our car and start removing the various plastic clips that we find on the upper part of the front bumper. Then, we unscrew the screws that we find underneath it, subsequently releasing the bumper on the sides, as shown in the video. At this point, we gently detach the entire bumper, replacing it with the new one; then we reassemble everything, applying the reverse process!


Posted on 25 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2011-2019 - Where can the front bumper of the Toyota Yaris be replaced? Read Answer
    • Yaris 2011-2019 - How much does it cost to replace the front bumper of the Toyota Yaris? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos