Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir in a Toyota Camry

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Antifreeze coolant

In this tutorial, you will see how to replace the coolant reservoir in a Toyota Camry, a very simple and quick operation. Before proceeding, ensure that the engine is completely cool for safety. Start by opening the hood, then locate the reservoir and unscrew both mounting bolts with a 10mm socket wrench. Next, disconnect the upper hose, remove the reservoir from its housing, and empty any remaining fluid. At this point, you can install the replacement, reassemble everything, and top off the coolant.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in Your Toyota Camry
How to Replace the Air Filter in Your Toyota Camry
Toyota Camry (2018-2024 / Xv70) When the engine air filter in your Toyota Camry is worn out and dirty, you must replace it with a new one to protect the engine and avoid dangerous o…
How to Replace the Air Filter on a 2022 Toyota Camry
How to Replace the Air Filter on a 2022 Toyota Camry
Toyota Camry (2018-2024 / Xv70) If you own a 2022 Toyota Camry and want to learn how to replace the cabin air filter, simply follow the steps outlined in this guide. First, park you…
How to replace the headlight bulb of the 2009 Toyota Camry
How to replace the headlight bulb of the 2009 Toyota Camry
Toyota Camry (2006-2013 / Xv40) To replace the headlight bulb of your 2009 Toyota Camry on your own, simply follow the simple procedure described in the following guide. First, make…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos