Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the 2018 Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

If the orange TPMS light related to tyre pressure continues to appear on the instrument cluster of your 2018 Toyota Yaris despite no punctures, don’t worry as you can reset it manually in a few seconds. Here’s how. First, get inside the car and turn on the ignition.

Then, locate the reset button situated in the lower area of the dashboard and press it three times in quick succession. Finally, wait for the light to stop flashing and turn off the ignition to complete the reset procedure.

If there are any errors, you can repeat the process.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Toyota Yaris Hybrid
How to Reset the TPMS Light on a Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) The tyre pressure warning light activates on all Hybrid vehicles when it is necessary to adjust the tyre pressures. This guide explains how to reset …
How to reset the "Service" light on a Toyota Yaris?
How to reset the "Service" light on a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) Good morning, today you will focus on the procedure to reset the "Service" light on your Toyota Yaris. Before proceeding, it is essential to ensure y…
How to Reset the Service Light on the Toyota Yaris iA?
How to Reset the Service Light on the Toyota Yaris iA?
Toyota Yaris (2011-2019 / Xp130) To reset the Service light on the Toyota Yaris iA, turn on the instrument cluster by turning the key, then navigate to the display in the centre of t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos