Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Warning Light on a 2013 Toyota Avalon

Model: Toyota Avalon Xx40 - Years 2013-2018
Part:

To reset the tire pressure warning light on your 2013 Toyota Avalon, follow these steps. First, enter the cabin and turn on the ignition by pressing the start button twice in quick succession. This will put the dashboard into diagnostic mode. Next, open the glove compartment located on the passenger side and locate the button on the left side. Press and hold it for a few seconds, then release it as soon as the tire light turns off.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire light in the Toyota Avalon?
How to reset the tire light in the Toyota Avalon?
Toyota Avalon (2013-2018 / Xx40) In this tutorial, you will see how to reset the tire light in the Toyota Avalon, a very simple and quick operation to perform only after restoring th…
How to Reset the Tire Pressure Light on a Toyota Avalon
How to Reset the Tire Pressure Light on a Toyota Avalon
Toyota Avalon (2013-2018 / Xx40) Today's procedure will show you how to reset the Tire Pressure Monitoring System (TPMS) light on a Toyota Avalon. Before performing the reset, ensure…
How to Reset Tire Pressure on Toyota Avalon
How to Reset Tire Pressure on Toyota Avalon
Toyota Avalon (2013-2018 / Xx40) In this quick tutorial, you will see the entire procedure to reset the tire pressure light on a Toyota Avalon, third generation model produced from 2…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos