Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2010 Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Tire pressure warning light

To reset the TPMS light, which relates to tyre pressure, you must check and adjust the pressure of all four tyres. After completing this initial step, you can proceed to reset the light. The TPMS light on the Toyota RAV4 resets automatically after you finish inflating the tyres as indicated by the manufacturer; you simply need to start the vehicle and wait a few seconds. Increase the engine revs if necessary. If the light continues to flash, it indicates a malfunction with the sensor, and you should take the vehicle to a workshop.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …
How to reset the TPMS light on the Toyota RAV4.
How to reset the TPMS light on the Toyota RAV4.
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If the TPMS warning light appears on the instrument panel of your Toyota RAV4 even in the absence of any punctures, you need to manually reset the li…
How to reset the tire pressure warning light on the Toyota RAV4.
How to reset the tire pressure warning light on the Toyota RAV4.
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide, we will see the instructions that will allow us to reset the tire pressure warning light on the Toyota RAV4 using an OBD scanner. Befo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos