Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Jump Start a Toyota Auris E180

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

In this video, see how to emergency start a Toyota Auris Hybrid E180, built between 2012 and 2018. Like all hybrid vehicles, it has a different starting system compared to petrol or diesel cars. Connect a booster to a terminal in the fuse box, which you will need to open.

Inside, you will find a red lever to lift, where there is a small socket: this is where you connect the positive terminal. Connect the negative terminal to any metal part, and this will allow you to start your vehicle.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Auris
How to Replace the Battery in a Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the battery in a Toyota Auris, open the bonnet to access the components inside the engine bay. On the right side, you will find the batter…
How do you program the key for the Toyota Auris?
How do you program the key for the Toyota Auris?
Toyota Auris (2012-2018 / E180) In order to program the key of the Toyota Auris, you need to insert it into the corresponding slot and also connect a diagnostic tool to the OBD port…
How to Use the Rear Camera on the Toyota Auris E180
How to Use the Rear Camera on the Toyota Auris E180
Toyota Auris (2012-2018 / E180) In this short and simple guide, you will learn how to use the rear camera for parking manoeuvres on the Toyota Auris E180. First, engage reverse gear…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos