Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Body

Today we will see the instructions that will allow you to open the bonnet of the Toyota Yaris, in simple and quick steps. First, open the driver's side front door and start pulling the plastic lever found at the bottom, near the pedals; then move to the front of the vehicle and release the lever located between the bonnet and the front bumper, as shown in the video. At this point, lift the bonnet and secure the prop rod to hold it up; all that remains is to lower it to close it, guiding the bonnet down to close it properly!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Open the Bonnet on a Toyota Yaris?
How to Open the Bonnet on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) As shown in this tutorial, opening the bonnet on a Toyota Yaris is an extremely simple and quick operation. First, open the driver's door, then locat…
How to replace the air filter of the Toyota Yaris 2 gasoline model.
How to replace the air filter of the Toyota Yaris 2 gasoline model.
Toyota Yaris (2005-2011 / Xp90) Today we will explain how to easily and quickly replace the air filter of the Toyota Yaris model 2. First, turn off the car, pull the handbrake, and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos