Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Toyota Aygo, first ensure all tyres are inflated to the correct pressure. This information is found on the sticker affixed to the driver’s door pillar. Once all tyres are inflated, insert the key to switch on the instrument panel. Next, open the glove compartment on the passenger side and locate a button with the low tyre pressure icon at the top. Press and hold this button until the warning light on the instrument panel disappears.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre pressure warning light on the Toyota Aygo, first inflate the tyres to the recommended pressure value, which is indicated on the sti…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos