Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Avensis?

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a Toyota Avensis, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks.

Start by going inside the cabin, then turn on the ignition, and using the "Trip" button on the dashboard, navigate to the distance travelled reading called "Trip A". Once there, press and hold the same button, turn off the ignition, and turn it back on again.

Finally, release the button only when the interval has been correctly reset.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Toyota Avensis
Resetting the Service Light on the Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Below are the step-by-step instructions on how to reset the service light for routine maintenance on the Toyota Avensis. First, get into the vehicle …
How to Reset the Service Light on a Toyota Avensis
How to Reset the Service Light on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) .. Today, you will learn how to reset the service light on a Toyota Avensis model T2700. This procedure should only be performed.. …
Reset Service Light on Toyota Avensis
Reset Service Light on Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) In today's tutorial, you will learn how to reset the service light for the oil change maintenance on a Toyota Avensis. Get into the car and turn the …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos