Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Tire pressure warning light

Below is the procedure to reset the tyre pressure warning light on the Toyota Yaris. Before resetting the TPMS, ensure all four tyres are at the correct operating pressure. First, get in the vehicle and turn on the ignition. Then, press and hold the set button located at the bottom left (under the steering wheel) until the TPMS light resets on the instrument panel. If the light does not reset, check the tyre pressures again, ensuring they match the values on the label.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on Toyota Yaris
How to Reset the Tyre Pressure Light on Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to reset the tyre pressure light on a Toyota Yaris? It's a very simple operation, let's see how to reset the tyre pressure light. Turn on the car…
How do you reset the tire pressure light on the Toyota Yaris?
How do you reset the tire pressure light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) The procedure to reset the tire pressure warning light on the Toyota Yaris is done by inflating the tires to the correct pressure value: this value i…
How to reset the tyre pressure warning light on the Toyota Yaris?
How to reset the tyre pressure warning light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lig…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos