Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Proace Verso
  6. : What is the fuse layout of the Toyota Proace van?

Toyota Proace Verso - Video tutorial

Model: Toyota Proace Verso MK 1 - Years 2016-2023
Part: Fuse box
Operation: What is the fuse layout of the Toyota Proace van?

If the devices in our Toyota Proace have suddenly stopped working, we can first check the status of the corresponding fuses, whose diagrams are indicated in this video. We find the first box inside the cabin, precisely behind the small door located in the lower left area of the dashboard, on the driver's side. The second box is instead positioned inside the engine compartment, protected by the black plastic cover near the battery. In case of a blown fuse, make sure to use a replacement with the same amperage and operate with the vehicle turned off.


Posted on 22 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos