Do it yourself
| ||||
|
Toyota Etios - Video tutorial
Model: Toyota Etios
MK 1
- Years 2010-2023 In this video we can see where the oil filter is located in the Toyota Etios and how to proceed in case we need to replace it, a very simple and quick operation. As shown, the filter in question is located in the lower area of the engine, so it will be necessary to lift the front side of the vehicle. Before proceeding, make sure that the engine itself is cold, then unscrew the drain plug bolt with a 14mm socket wrench, let the old oil drain out and unscrew the filter. Tighten both the replacement and the bolt at this point and pour the new oil through the upper hole.
Posted on 4 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |