Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : How to reset the maintenance light on the 2021 Toyota 4Runner

Toyota 4runner - Video tutorial

Model: Toyota 4runner N280 - Years 2010-2023
Part: Instrument cluster
Operation: How to reset the maintenance light on the 2021 Toyota 4Runner

If you want to manually reset the maintenance light on the instrument panel of your 2021 Toyota 4Runner, simply follow these steps. First, enter the interior of the vehicle and turn on the instrument panel, then press the button located below the speedometer several times until the display shows "Trip A". At this point, turn off the panel and hold down the same button used earlier. Simultaneously turn on the panel and wait for the maintenance light to reset. Finally, turn off the panel and release the button.


Posted on 13 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 4runner 1996-2002 - What are the problems with the Toyota 4Runner fuel gauge? Read Answer
    • 4runner 2002-2009 - What to do if the 2008 Toyota 4Runner fuel gauge doesn't work? Read Answer
    • 4runner 2002-2009 - Why is the 2008 Toyota 4Runner fuel gauge not working? Read Answer
    • 4runner 2010-2023 - Why does the Toyota 4Runner service light come on after the service? Read Answer
    • 4runner 2002-2009 - Why does the Toyota 4Runner 2008 speedometer not work? Read Answer
    • 4runner 1996-2002 - What does the Toyota 4Runner 2 service light indicate? Read Answer
    • 4runner 2010-2023 - What to do if the fuel gauge of the Toyota 4Runner of 2012 does not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos