Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear headlight bulbs of the Toyota Yaris

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Tail light bulb

To replace the rear light bulb of a Toyota Yaris, start by opening the trunk, remove the plastic cover on the back of the headlight by releasing the tab, and find 3 bulb holders. Unscrew the one you need to replace, press the bulb, slightly twist it and remove it. Then take the new bulb, press it into the holder and twist it slightly. To replace the third brake light bulb, remove the rear plastic cover, unscrew the bolt with a socket wrench and release the clip on the other side. Then move the headlight to access the bulb holder, twist it, remove it and take out the bulb. Now take the new bulb, put it into the holder, insert it into its slot and twist it slightly. Finally, screw the bolt and reattach the clip. Now put the rear plastic cover back on and check the bulbs are working correctly.

Posted on 22 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2011-2019 / Xp130) In the selected video, you can observe the steps to follow in order to replace the brake light bulb of a Toyota Yaris rear headlight. To access the r…
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you can see how to replace the bulb of a rear headlight of a Toyota Yaris car. Open the trunk of the car to locate the rear h…
Toyota Yaris (2011-2019 / Xp130) If you notice that a rear light bulb is not functioning and you want to replace it yourself, follow the instructions and steps outlined below for saf…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos