Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Mirror on a Toyota

Model: Toyota Toyota Various
Part: Rearview mirror

Video tutorial

Today, you will learn how to remove the interior rear-view mirror on a Toyota. This operation is very simple and quick to perform independently in just a few minutes.

Simply push the mirror upwards to remove it. If you need to remove the clip as well, disengage it using a plastic lever, then use a metal lever to remove any adhesive left on the glass and use spray to eliminate residues. To refit the mirror, simply insert it into the clip from the bottom upwards.

If you need to position the clip, apply the adhesive and then place the clip on the glass.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Remove the External Wing Mirror on a Toyota Avanza?
How to Remove the External Wing Mirror on a Toyota Avanza?
Toyota Toyota Various In this tutorial, you will see how to remove the external wing mirror on a Toyota Avanza, a task that is extremely simple and quick. To do this, you …
How to Replace the Wing Mirror on a Toyota Sienna?
How to Replace the Wing Mirror on a Toyota Sienna?
Toyota Toyota Various To replace the external wing mirror on a Toyota Sienna, loosen the screw located at the handle's housing. This will allow you to lift the upper part …
How to remove the shell of the external rearview mirror of a Toyota.
How to remove the shell of the external rearview mirror of a Toyota.
Toyota Toyota Various In this video, we can see the correct method for removing the cover of an external rearview mirror. In this case, it is a Toyota vehicle, but of cour…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos