Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: License plate light

In this short but detailed video, learn how to remove a number plate light from your Aygo. Get a flathead screwdriver and insert it around the perimeter of the plastic light, prying it out until the entire unit comes away. Once the power cable is exposed, disconnect it and replace the bulb with a new one. Now reconnect the power terminal to the light unit, then position it in the slot of the bumper and press it in with your hands until it clicks into place. Finally, check that the light unit is securely fitted in its housing.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace Toyota Aygo license plate lights
How to replace Toyota Aygo license plate lights
Toyota Aygo (2014-2023 / Ab40, MK 2) Let's find out below the guide that will allow us to disassemble and replace the Toyota Aygo license plate lights, by following these simple steps. F…
How to Change the Number Plate Bulb on Toyota Aygo
How to Change the Number Plate Bulb on Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the number plate light bulb on the Toyota Aygo (the procedure is the same for the Peugeot 107 and Citroen C1), first, extract the light un…
How to reset the tire pressure warning light on a Toyota Aygo?
How to reset the tire pressure warning light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tire pressure light on a Toyota Aygo, start by locating the reset button, which is found in the front passenger side glove box. Turn on …

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos