Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

To perform this operation, first locate the position of the filter so you can access it by removing the covering parts. It is located behind the small glove compartment, and to reach it, completely remove the compartment by opening it and pushing on the sides to release it. Then, remove the cover to extract the old filter, paying attention to the orientation in which it is installed.

Install the new filter following the indicated orientation, retrace the steps in reverse for reassembly, and you're done!


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on Toyota Rav 4
How to Remove the Air Filter on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Remove the worn air filter on a Toyota Rav 4. Replace the part located inside the engine bay. Open the car door, pull up the bonnet release lever loc…
Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today's video will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D, in simple and quick steps. First, we o…
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the fuel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following steps will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D. First, we open the hood of the c…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos