Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris Sedan
    4. : 2005-2013 (Xp90)

Toyota Yaris Sedan Years 2005-2013 (Xp90)

Toyota Yaris Sedan (2005-2013 / Xp90)
How to replace the coolant in a Toyota Yaris?
In this tutorial we can see how to replace the coolant in a Toyota Yaris. Before proceeding, we wait for the engine to be completely cool in order to avoid …read all…
Posted on 14 April 2023 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
How to remove the mirror cap on a Toyota Yaris Sedan
We can see with today's very short video tutorial how to disassemble the outside rear view mirror cap of a first generation Toyota Yaris Sedan, model produced …read all…
Posted on 5 May 2023 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
Setting the time on the Toyota Yaris
In order to proceed with changing the time on the car, it is necessary to proceed as follows: the display with the time is present on the instrument panel on …read all…
Posted on 11 November 2022 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
Toyota Yaris rear axle bearing replacement
To replace a rear wheel bearing on a Toyota Yaris sedan it is necessary to proceed as follows: remove the rim and remove the rear brake drum. Using a socket …read all…
Posted on 24 October 2022 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
How to repair the central glove box of a Toyota Yaris Sedan
On the Toyota Yaris Sedan there is a central glove box which may not close at all or not close perfectly. The problem is not given by the small buttons on the …read all…
Posted on 17 May 2022 by ScegliAuto
Toyota Yaris Sedan (2005-2013 / Xp90)
How to replace the drip molding on the Toyota Yaris Sedan
If we want to replace the rubber molding of the drip on the roof of the car we must follow the instructions below and refer to the video. Over the years, …read all…
Posted on 11 May 2024 by ScegliAuto
Bodywork (2) Key (1) -board computer (1) Checks and maintenance (1) Bearing (1) Headlight bulb (1) Antifreeze liquid (1) Fuse box (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos