Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In a few simple steps, we will see how to perform the routine maintenance of changing the motor oil and oil filter on the Triumph Speed Triple. First, we put the motorcycle on the stand and start by loosening the oil drain bolt located under the engine, letting it drain into a container for about ten minutes; then we unscrew the oil filter cartridge and replace it with a new one, as shown in the video. At this point, we top up with the new motor oil, filling it up to the maximum level mark!

Posted on 20 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
Speed Triple This brief guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, unscrew …
How to Replace the Engine Oil and Oil Filter of the Triumph Speed Triple
How to Replace the Engine Oil and Oil Filter of the Triumph Speed Triple
Speed Triple Discover the procedure to carry out the routine maintenance service by replacing the engine oil and oil filter of the Triumph Speed Triple. First, pl…
How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050
How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050
Speed Triple Today, let's see how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, place your bik…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos