Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Triumph Street Triple 675 RX.

Model: Triumph Street Triple 675r
Part: Brake pads

Video tutorial

The following steps will show us how to disassemble and replace the front brake pads of the Triumph Street Triple 675 RX motorcycle. First, we put the motorcycle on the stand and start unscrewing the fixing screws of the front brake caliper, also unscrewing the central pin of the pads; we remove the pads with pliers, cleaning the caliper from the residual dirt, as shown in the video.

At this point, we install the new original brake pads, inserting them in the correct direction; we assemble the caliper and then remount it on the disc, replacing the pads in the same way on the other front brake caliper.


Posted on 27 August 2025 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Triumph Street Triple 675
Replacing the Front Brake Pads on the Triumph Street Triple 675
Street Triple 675r Follow the steps below to remove and replace the front brake pads on the Triumph Street Triple 675. First, place the motorcycle on a stand and start …
How to Replace the Front Brake Pads on the Triumph Street Triple 675?
How to Replace the Front Brake Pads on the Triumph Street Triple 675?
Street Triple 675r To replace the front brake pads on the Triumph Street Triple 675, loosen the two bolts securing the brake caliper to the disc. Once the bolts are rem…
How to Replace Brake Pads on a Triumph Street Triple
How to Replace Brake Pads on a Triumph Street Triple
Street Triple 675r In this video tutorial, learn how to remove and replace the front brake pads on a Triumph Street Triple and Speed Triple, following the instructions …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos