Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will find the main instructions to remove and replace the air filter on a Triumph Speed Triple 1050, detailed in the following steps. First, remove the screws from the panel above the fuel tank. Then, take off the two clips to access the air filter cover. Next, unscrew its fastening screws to pull out and extract the filter. Replace it with the correct new one, ensuring it is inserted in the proper direction. Finally, reassemble all components.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Triumph Speed Triple 1050
How to Replace the Air Filter on the Triumph Speed Triple 1050
Speed Triple You can replace the air filter on the Triumph Speed Triple 1050 by loosening the screws that secure the fuel tank to its housing: once the screws are…
How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
Speed Triple This brief guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, unscrew …
How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050
How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050
Speed Triple Today, let's see how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, place your bik…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos