Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
For this motorcycle model, it is recommended to use a 10W-50 four-stroke engine lubricant. You will need approximately 3.5 litres to fill the oil compartment. It is advisable to warm up the engine for a few minutes before performing an oil change, so that the circulating lubricant is less viscous and flows more easily. Unscrew the bolt that acts as a cap for the drain hole and collect the oil in a container (and dispose of it properly at recycling centres). While the oil drains, unscrew and replace the oil filter, remembering to lightly lubricate the O-ring of the new filter. Add the new oil and you are done.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp of the Triumph Street Triple 765R?
How to Replace the Headlamp of the Triumph Street Triple 765R?
Street Triple 765r To replace the headlamp of the Triumph Street Triple 765R, you need to loosen all the screws that secure the headlight unit to its housing: these scr…
How to Install Heated Grips on a Triumph Street Triple 765R?
How to Install Heated Grips on a Triumph Street Triple 765R?
Street Triple 765r To install heated grips on a Triumph Street Triple 765R, first remove the mirrors by loosening the corresponding bolts, then take off the old grips. …
How do you replace the exhaust on the Triumph Street Triple 765?
How do you replace the exhaust on the Triumph Street Triple 765?
Street Triple 765r The replacement of the exhaust installed on the Triumph Street Triple 765 can be carried out by loosening the screws that secure the end can to its h…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos