Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Trophy 1215
In this tutorial, you will learn how to replace the engine oil in the Triumph Trophy 1215, a very simple and quick operation. First, ensure the engine is sufficiently cool. Then, locate the drain plug on the underside of the engine and loosen it using an 8 mm hex key. Allow all the oil in the system to drain out. Next, remove the old filter using pliers and tighten both the new filter and the drain plug. Finally, pour in the new oil through the designated upper hole.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Triumph Trophy 900
How to Change the Engine Oil of the Triumph Trophy 900
Trophy 900 To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loos…
Where is the Gear Position Sensor on the Triumph Trophy 900?
Where is the Gear Position Sensor on the Triumph Trophy 900?
Trophy 900 To replace the gear position sensor on the Triumph Trophy, loosen the screws that secure the fairing on the left side of the bike so that it can be c…
How do you replace the front brake pads of the Triumph Trophy SE?
How do you replace the front brake pads of the Triumph Trophy SE?
Trophy 900 In order to replace the front brake pads of the Triumph Trophy SE, you need to loosen the screws that secure the brake caliper to its corresponding d…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos