Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Explorer 1200
To replace the exhaust on the Triumph Explorer 1200, loosen the screws that secure it to the corresponding supports located at the rear of the bike, on the right side. Once the screws are loosened, proceed to widen the ring that connects the exhaust to the remaining part of the exhaust pipe. At this point, position the new exhaust in its place, ensuring that you can connect the corresponding ring and secure it to its supports. After installation, check that everything is functioning correctly.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Triumph Tiger 1200 Rally Explorer remote control?
How to replace the battery of the Triumph Tiger 1200 Rally Explorer remote control?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the battery of the remote control of the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick …
How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the engine oil in the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick operation. First of…
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos