Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the UAZ Patriot fuse box

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Fuse box

Locating the fuse box inside your car is often a daunting task and this is also true for the UAZ Patriot. Thanks to this guide, however, you will be able to find all the various fuses without any kind of difficulty. First, make sure you have completely shut down the vehicle. Then go to the driver's side and locate the compartment in the lower part of the dashboard, to the left of the steering wheel. Completely remove the present panel and immediately behind you will finally have access to the car fuses. Before any maintenance or replacement, remember to disconnect the battery and wear rubber gloves.

Posted on 30 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the air filter of the UAZ Patriot
Replacement of the air filter of the UAZ Patriot
UAZ Patriot (2005-2022 / MK 1) In this video tutorial we will see how to disassemble and replace the Uaz Patriot engine air filter, following the instructions below. First of all, …
How to replace the door lock on the UAZ Patriot?
How to replace the door lock on the UAZ Patriot?
UAZ Patriot (2005-2022 / MK 1) In order to replace the door lock of the Uaz Patriot, you need to open the door itself, so that you can act on the component positioned in the side a…
How to disassemble the taillights in the UAZ Patriot?
How to disassemble the taillights in the UAZ Patriot?
UAZ Patriot (2005-2022 / MK 1) In this tutorial we can see how to disassemble the rear lights in the UAZ Patriot, a very simple and fast operation. First of all, make sure that the…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos