Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Location of the Spare Tire on the UAZ Hunter

Model: UAZ Hunter 469 MK 1 - Years 1997-2022
Part: Wheel

The spare tire of the UAZ Hunter is very heavy, over 73 lb, and leaving it on the rear door makes it very difficult to open and close the door. Let's see how to place it under the rear seat. The first concern is to find another spot to attach the rear seat belts because that’s where we want to put our spare tire. We will use a sturdy aluminum block 1.6 in thick on each side, with a hook to attach the seat belts—no plastic or wood for a safety system, nothing that can collapse or break. We can see the result in the video with the tire effectively placed under the seat.

Updated on 8 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Differential on the UAZ Hunter 469?
How to Replace the Differential on the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To replace the differential on the UAZ Hunter 469, loosen the screws that secure the two half shafts and the differential located at the center of th…
Install an Armrest on a UAZ Hunter 469
UAZ Hunter 469 (1997-2022 / MK 1) If you want to install the center armrest on your UAZ Hunter 469, you should visit this site: myuaz.com where you will find everything that can be us…
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To activate the all-wheel drive in the UAZ Hunter 469, tighten the central bolts of the wheels using a hex wrench as shown in the tutorial. Once the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos