Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Uaz Hunter

Model: UAZ Hunter 469 MK 1 - Years 1997-2022
Part: Battery

If you plan to replace the battery in this vehicle yourself, follow the simple instructions provided in this description and refer to the images in the video tutorial. After opening the hood and locating the battery on the right side, disconnect the negative terminal first, then the positive terminal. Lift the battery out of the engine compartment, take the new battery, and place it in its housing. Finally, reconnect the positive terminal first, then the negative terminal, and the job will be complete.

Updated on 9 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Differential on the UAZ Hunter 469?
How to Replace the Differential on the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To replace the differential on the UAZ Hunter 469, loosen the screws that secure the two half shafts and the differential located at the center of th…
How to Replace the Door Lock of the Uaz Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To replace the door lock of the Uaz Hunter 469, loosen the two screws that secure the internal door handle, completely removing it. Once the handle i…
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To activate the all-wheel drive in the UAZ Hunter 469, tighten the central bolts of the wheels using a hex wrench as shown in the tutorial. Once the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos