Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Hummer
    4. : 2003-2009 (MK 1)

(Various brands) Hummer Years 2003-2009 (MK 1)

(Various brands) Hummer (2003-2009 / MK 1)
Remove the Peugeot 307 tailgate lock
Let's see the disassembly and disassembly of the damaged lock located in the tailgate of a Peugeot 307. We open the tailgate of the car, unscrew the tightening …read all…
Posted on 23 January 2024 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to replace the gearbox bulbs on a Hummer H2
Let's start by going to sit in the driver's seat of our Hummer H2. Once this is done, we will have to unscrew and remove the two screws that secure the gear …read all…
Posted on 4 January 2024 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
Hummer seat headrest removal
Today we will show you how to disassemble the headrest on a Hummer. This is in particular a Hummer H3, but the headrest is mounted in the same way on all the …read all…
Posted on 2 January 2024 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
Removing the Alfa Romeo Mito external rear-view mirror
In this video we will see how to remove the exterior rearview mirror of the Alfa Romeo Mito. Once you have disassembled the door panel and disconnected its …read all…
Posted on 8 December 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to remove and install the plastic rear window of the soft top of a BMW Z3
How to remove and install the plastic rear window above the soft top of a BMW Z3? Let's see in this video how to proceed. Let's start the disassembly: remove …read all…
Posted on 26 November 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to replace the battery of a Peugeot 3008
How to do the maintenance of our Peugeot 3008? This video explains how to replace the battery located in the front compartment. We open the car door and pull …read all…
Posted on 22 November 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to reset the service light on the Hummer H3
Let's see how to reset the service light on Hummer H3. To reset the car maintenance warning light: turn on the car's instrument panel, use the buttons located …read all…
Posted on 11 November 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to change the engine oil and filter of a Fiat Panda
Do you want to change the oil and filter of your petrol-powered Fiat Panda? Let's see how to proceed in this video. We raise the bonnet and put it in safety, …read all…
Posted on 4 October 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
How to remove the disc brake of a Citroen C3
Let's see in this video how to change the disc brake with relative brake pads on a Citroen C3. First of all we lift the car on a column point or jack to the …read all…
Posted on 4 October 2023 by ScegliAuto
(Various brands) Hummer (2003-2009 / MK 1)
Replacement wiper blades
The replacement of the wiper blades is extremely simple. Before proceeding with the replacement, make sure that the length of the new brushes is compatible …read all…
Posted on 28 July 2023 by ScegliAuto
Battery (1) Soft top (1) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (1) Interior lights ceiling light bulb (1) Engine oil (1) Seat (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos