Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Fiat Panda

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Engine oil

Do you want to change the oil and filter on your petrol Fiat Panda? Follow this guide. Lift the bonnet and secure it, then raise the car on a column lift or jack. Unscrew the bolt from the oil sump, let the fluid drain into a disposal container, and re-screw the oil sump bolt. Use a strap wrench to unscrew the oil filter, remove it, and fit the new part. Finally, top up with new fluid, measuring the oil level with the metal dipstick several times until you reach the ideal measurement.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Hummer H3
How to Reset the Oil Change Light on a Hummer H3
(Various brands) Hummer (2005-2010 / H3) In this video tutorial, you can see how to reset the oil change light on a Hummer H3. The first step is to perform maintenance on the vehicle, such a…
How to Reset the Oil Light on the Hummer H3
How to Reset the Oil Light on the Hummer H3
(Various brands) Hummer (2005-2010 / H3) If you have just changed the engine oil and filter but notice the warning light, don’t worry as the issue can be easily resolved with a quick reset p…
How to Replace the Cabin Air Filter on a GMC Hummer
How to Replace the Cabin Air Filter on a GMC Hummer
(Various brands) Hummer (2005-2010 / H3) To replace the cabin air filter on this vehicle, follow the steps outlined below. First, access the cabin from the passenger side and locate the comp…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos