Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Hummer H3

Model: (Various brands) Hummer H3 - Years 2005-2010
Part: Service warning light

In this video tutorial, you can see how to reset the oil change light on a Hummer H3. The first step is to perform maintenance on the vehicle, such as changing the engine oil and filters. After completing the DIY maintenance, get in the vehicle and engage the handbrake, insert the key, and turn on the instrument panel while keeping the engine off. The oil change message appears on the display. Press the TRIP button for the trip mileage until the oil life appears; at this point, hold the button until it flashes and alternates between RESET and oil life; keep holding the button until you hear three beeps; turn off and restart the engine to verify the correct reset of the oil life.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Hummer H3
How to Reset the Oil Light on the Hummer H3
(Various brands) Hummer (2005-2010 / H3) If you have just changed the engine oil and filter but notice the warning light, don’t worry as the issue can be easily resolved with a quick reset p…
How to Reset the Service Light on a Hummer H3
How to Reset the Service Light on a Hummer H3
(Various brands) Hummer (2003-2009 / MK 1) Let's see how to reset the service light on a Hummer H3. To reset the car maintenance light: turn on the instrument panel, use the buttons located ab…
How to Replace the Gear Shift Bulbs in a Hummer H2
How to Replace the Gear Shift Bulbs in a Hummer H2
(Various brands) Hummer (2003-2009 / MK 1) Start by sitting in the driver's seat of your Hummer H2. Next, unscrew and remove the two screws that secure the gear shift lever, then remove the ge…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos