Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Hummer
  6. : How to replace the remote control battery of the Hummer H3?

(Various brands) Hummer - Video tutorial

Model: (Various brands) Hummer H3 - Years 2005-2010
Part: Key
Operation: How to replace the remote control battery of the Hummer H3?

As we can see in this tutorial, replacing the Hummer H3 remote control battery is a very quick and easy operation. To do this, we will need a replacement CR2032 battery and a small flat-tip screwdriver. To open the remote control, we insert the tip of the screwdriver into the slot located along the bottom edge and pry it up. Once fully open, remove the old battery, located in the back of the door, and insert the spare one, taking care to position it with the negative pole facing us. We follow the reverse procedure to put everything back together.


Posted on 2 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos