Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of a Peugeot 3008

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Battery

How do you maintain your Peugeot 3008? This guide explains how to replace the battery located in the front compartment. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet, disengaging the locking lever with your fingers, and secure it. Once the engine compartment is open, you will find the battery at the top right (remove the cover); unscrew the nuts securing the battery terminals; remove it from the engine compartment and replace it with a new one (same voltage). Close the engine cover after installing the battery.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Hummer H3
How to Replace the Remote Battery of the Hummer H3
(Various brands) Hummer (2005-2010 / H3) Replacing the remote battery of the Hummer H3 is a very simple and quick task. To do this, obtain a replacement battery of type CR2032 and a flat too…
How to Replace the Remote Battery of the Hummer H3?
How to Replace the Remote Battery of the Hummer H3?
(Various brands) Hummer (2005-2010 / H3) As shown in this tutorial, replacing the remote battery of the Hummer H3 is a very simple and quick operation. You will need a replacement CR2032 bat…
Removing Tailgate Lock on Peugeot 307
Removing Tailgate Lock on Peugeot 307
(Various brands) Hummer (2003-2009 / MK 1) Let’s see how to remove the damaged lock located in the tailgate of a Peugeot 307. Open the car's tailgate, unscrew the fastening screws located in t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos