Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Hummer
  6. : How to reset the Hummer H3 oil warning light

(Various brands) Hummer - Video tutorial

Model: (Various brands) Hummer H3 - Years 2005-2010
Part: -board computer
Operation: How to reset the Hummer H3 oil warning light

If you have just changed the engine oil and the respective filter but you notice the warning light, do not worry because the problem is easily solved through a quick reset procedure. Once inside the passenger compartment, turn on the instrument panel and fully depress the accelerator pedal three consecutive times. Finally, turn off the picture and you are done. In case of errors during the procedure, you can easily repeat it from the beginning by switching the instrument panel off and on again. The warning light will no longer light up from the next start.


Posted on 13 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos