Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Plastic Rear Window of a BMW Z3 Hood

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Convertible top

How to remove and install the plastic rear window above the hood of a BMW Z3? Let’s see how to proceed in this video. Start the disassembly: remove the hinge plate (as shown in the video); take the hinge and follow the perimeter of the rear window. Pull the plastic of the rear window with your hands to detach it from the fabric edge. After removing the rear window, install the new one (hinge the window around the perimeter of the rear window). Secure the hinge with the metal plate, press, and stretch the hood seal. Check the correct insertion of the rear window at all points.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Tailgate Lock on Peugeot 307
Removing Tailgate Lock on Peugeot 307
(Various brands) Hummer (2003-2009 / MK 1) Let’s see how to remove the damaged lock located in the tailgate of a Peugeot 307. Open the car's tailgate, unscrew the fastening screws located in t…
How to Remove the Brake Disc of a Citroen C3
How to Remove the Brake Disc of a Citroen C3
(Various brands) Hummer (2003-2009 / MK 1) Follow this guide to change the brake disc and brake pads on a Citroen C3. First, lift the car on a column jack or trolley jack to the desired height…
How to Replace the Remote Battery of the Hummer H3?
How to Replace the Remote Battery of the Hummer H3?
(Various brands) Hummer (2005-2010 / H3) As shown in this tutorial, replacing the remote battery of the Hummer H3 is a very simple and quick operation. You will need a replacement CR2032 bat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos