Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Bulbs in a Hummer H2

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Interior dome light bulb

Start by sitting in the driver's seat of your Hummer H2. Next, unscrew and remove the two screws that secure the gear shift lever, then remove the gear shift lever itself. After that, unclip and remove the central console of the vehicle to access the internal bulbs. This way, you will reach the blown bulbs of the gear shift. Proceed to extract and remove them, and you will have completed the disassembly. To install the new bulbs and reassemble everything, simply repeat these steps in reverse, and the replacement will be successfully completed.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Headrest from a Hummer Seat
Removing the Headrest from a Hummer Seat
(Various brands) Hummer (2003-2009 / MK 1) Today, you will learn how to remove the headrest from a Hummer. This specifically applies to a Hummer H3, but the headrest is mounted in the same way…
How to Replace the Remote Battery of the Hummer H3?
How to Replace the Remote Battery of the Hummer H3?
(Various brands) Hummer (2005-2010 / H3) As shown in this tutorial, replacing the remote battery of the Hummer H3 is a very simple and quick operation. You will need a replacement CR2032 bat…
How to Reset the Service Light on a Hummer H3?
How to Reset the Service Light on a Hummer H3?
(Various brands) Hummer (2005-2010 / H3) To clear the Service light on a Hummer H3, insert the ignition key into the lock and turn it to activate the instrument cluster without starting the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos