Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Hummer
    4. : Replacement wiper blades

(Various brands) Hummer - Video tutorial

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Windscreen wipers
Operation: Replacement wiper blades

The replacement of the wiper blades is extremely simple. Before proceeding with the replacement, make sure that the length of the new brushes is compatible with the original ones and opt for a quality product given the low cost (we do not recommend replacing only the rubber band). Once the blade control arm is lifted from the windscreen, rotate it 90Â °, press the retaining tab and pull back to remove it. Then insert the new brush, aligning the fixing hook with the relative seat of the control arm; then press the fastening hook until the safety tab snaps into place.


Posted on 28 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos