Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Hummer
    4. : How to remove the disc brake of a Citroen C3

(Various brands) Hummer - Video tutorial

Model: (Various brands) Hummer MK 1 - Years 2003-2009
Part: Brake discs
Operation: How to remove the disc brake of a Citroen C3

Let's see in this video how to change the disc brake with relative brake pads on a Citroen C3. First of all we lift the car on a column point or jack to the desired height, immediately after we go to remove the rim (with a telescopic wrench or an air drill) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the caliper support. We remove the caliper support from the wheel hub with a socket wrench. Once the brake disc is free, let's unscrew the torx screws with a screwdriver and unscrew the disc from the wheel hub. Let's get ready to assemble the new disc with its pads, proceeding backwards in the operations.


Posted on 4 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos