Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The throttle grip must return promptly to the resting position once released, having only a little play. Adjust it by placing spacers near the throttle control (see video). The clutch should have a medium amount of play; if it has none, it will remain engaged, while too much play will cause dragging with the gear engaged during stops. This is also adjusted with a spacer near the lever. The gear and brake levers should be positioned to allow your foot to rest when not in use. For the gear lever, adjust the setting between the lever and the pump; for the brake lever, a screwdriver or a slotted profile will be needed.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the odometer of the Rieju MRT
How to adjust the odometer of the Rieju MRT
(Various brands) Various Adjusting the odometer of the Rieju Mrt is very simple, as it is possible to perform this operation independently, thanks to our tutorial. The first …
How to adjust the carburation on a motorcycle?
How to adjust the carburation on a motorcycle?
(Various brands) Various In today's video, we will see how to adjust the carburation of a motorcycle. There are two main methods of action: - you can turn the screw on the si…
How to Adjust Motorcycle Tyre Pressure
How to Adjust Motorcycle Tyre Pressure
(Various brands) Various This video explains the differences between various tyre constructions (hard ones that support lower pressures, soft ones that require higher pressur…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos