Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Odometer on a Rieju MRT

Model: (Various brands) Various
Part: Instrument cluster

Video tutorial

Adjusting the odometer on the Rieju MRT is very simple and can be done independently, thanks to our tutorial. The first step is to turn on the motorcycle's instrument panel and simultaneously press the two buttons on the odometer, releasing them when the display shows the word SPEED. The second step is to press the right button to adjust the odometer and enter the desired values.

Once finished, simply return to the main menu and switch off the motorcycle's instrument panel.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Reset the Trip Meter of the Škoda?
How to Reset the Trip Meter of the Škoda?
(Various brands) Various To reset the trip meter of the Škoda, insert the ignition key into the ignition switch to turn on the instrument cluster. Once the cluster is on, scr…
How to Set the Time on the Piaggio Vespa
How to Set the Time on the Piaggio Vespa
(Various brands) Various If you need to set the time on this model of motorcycle, the following description provides the procedure and various simple operations to update the…
How to Remove the Speedometer Drive on the Piaggio Si
How to Remove the Speedometer Drive on the Piaggio Si
(Various brands) Various If you are experiencing malfunctions with the speedometer on your motorcycle, it may be necessary to replace or service the speedometer drive itself.…

    Frequently Asked Questions

    • Vari - How does the oil pressure sensor 1.6 HDI position work? Read answer
    • Vari - How to set the time on Piaggio Medley? Read answer

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos