Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speedometer Drive on the Piaggio Si

Model: (Various brands) Various

If you are experiencing malfunctions with the speedometer on your motorcycle, it may be necessary to replace or service the speedometer drive itself. Once the drive is removed, which is located on the front wheel axle, you will need to disassemble the front wheel axle to access it. Next, remove the drive collar, followed by the ring. Given the drive's position, which is exposed to road dirt, thorough cleaning with a degreaser and lubricant will be necessary for proper functioning. Finally, you can proceed to reassemble it.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Speedometer Cable on Agm Vx50 - BTC Riva - Turbho RL50
How to Remove the Speedometer Cable on Agm Vx50 - BTC Riva - Turbho RL50
(Various brands) Various In this video tutorial, you will learn how to remove and replace the speedometer cable on various scooter models, such as the Agm Vx50, BTC Riva, and…
How to adjust the odometer of the Rieju MRT
How to adjust the odometer of the Rieju MRT
(Various brands) Various Adjusting the odometer of the Rieju Mrt is very simple, as it is possible to perform this operation independently, thanks to our tutorial. The first …
How to disassemble the transmission pulley of the Piaggio SI
How to disassemble the transmission pulley of the Piaggio SI
(Various brands) Various Today we will see the instructions that will allow us to disassemble and replace the transmission pulley of the Piaggio SI, but also of the Ciao and …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos