Do it yourself
Frequently asked questions about cars and motorcycles
In this video, you will learn how to change a motorcycle battery: in 90% of motorcycles, it is located under the seat, and on sports bikes, the screws are usually at the corners of the seat, which you need to remove. First, you must free it. In this specific case, there is a drop sensor as a battery holder. This is important because it must be reinstalled correctly. Take a photo before disassembling it to ensure you reinstall it in the right orientation. Start by disconnecting the negative terminal, then the positive, and you can remove the battery. To reinstall it, follow the reverse order, connecting the positive terminal first and then the negative. One warning: during winter, it is advisable to keep the battery charged with a battery maintainer; do not do this with lithium batteries, which require a specific device.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video we can see a generic way to change the alternator of a car. In fact, the method is essentially the same on all cars: only the position …
(Various brands) Various In this video tutorial, see how to replace the scooter battery and the motorcycle spark plug. To replace the scooter battery, obtain a suitable batte…
(Various brands) Various If you have tried to start your motorcycle but it does not respond, the first suspect is the battery, which suffers in low temperatures, especially w…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos