Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to disassemble the Derbi D50B1 engine, it is necessary to remove it from the housing compartment: to remove the engine, it is necessary to loosen the screws that secure it to its supports and disconnect the connectors connected to the sensors. Once the engine block has been removed, it will be necessary to unscrew the screws that secure the two half side covers and also those that secure the cylinder at the top, removing it completely. The piston inside can now be freed from its connecting rod by removing the retaining ring, and it will be possible to remove and replace all the other parts in the engine.

Posted on 26 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Derbi D50B1 Engine?
How to Dismantle the Derbi D50B1 Engine?
(Various brands) Various To dismantle the Derbi D50B1 engine, first remove it from its housing by loosening all the screws that secure it to the respective mounts and disconn…
How do you disassemble the Derbi Bidalot 96 engine?
How do you disassemble the Derbi Bidalot 96 engine?
(Various brands) Various In order to disassemble the Derbi Bidalot 96 engine, you need to loosen the screws that hold it in place, so that it can be removed from its housing.…
How do you disassemble the Derbi D50B0 engine?
How do you disassemble the Derbi D50B0 engine?
(Various brands) Various To disassemble the Derbi D50B0 engine, you need to loosen the screws that hold it to the specific supports located in the center of the frame: once t…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos