Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Original Car Radio

Model: (Various brands) Various
Part: Car stereo

To carry out this operation, first remove the connections from the battery to work safely and avoid damaging any delicate circuits. Usually, specific tools are required to extract the original stereo, which fit into holes on the stereo, allowing you to remove it easily. Once extracted, disconnect the plugs at the back of the stereo and proceed to install the new stereo after reconnecting the plugs, and you're done!

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Want to replace the car radio? Remove the existing radio and install a new, more modern one. Use original or aftermarket metal keys to detach the rad…
(Various brands) Various To improve the audio quality of your vehicle, you can replace the standard radio with a more powerful model. Use a plastic lever to remove the trim o…
(Various brands) Various Want to remove the car radio and don't know how? This guide shows you how to take out the original stereo and install another one. Remove the trim fr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos