Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Heater Resistor

Model: (Various brands) Various
Part: Heater core

The first step is to locate the resistor, which is positioned behind the glove compartment in front of the front passenger seat. In some cases, it may be located outside the cabin, specifically under the bonnet. You will need to access the ducts connected to the fan that pushes air into the cabin to disconnect the connectors from the resistor for removal. If necessary, unscrew the screws securing it. Then, proceed with replacing the part and retrace the steps described for reassembly.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Testing the Cabin Fan of a Car
Testing the Cabin Fan of a Car
(Various brands) Various Today, you will learn how to test the cabin fan of a generic car in simple steps. First, you should remove the fan, which is usually found inside the…
Replacing the Car Fuse
Replacing the Car Fuse
(Various brands) Various How to replace damaged fuses in your car? First, locate the fuses and how to replace them. Open the door and enter the vehicle, then remove the cover…
How to Replace the Clutch Cable on a Piaggio Ape 200
How to Replace the Clutch Cable on a Piaggio Ape 200
(Various brands) Various To replace the clutch cable on a Piaggio Ape 200, open the bonnet to locate the end of the cable connected to the clutch actuator. Disconnect this en…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos