Do it yourself
Frequently asked questions about cars and motorcycles

Guide to using the Aixam Mega Van

Model: (Various brands) Aixam

This short and simple guide will show us how to start the engine and operate the automatic transmission of the Aixam Mega Van. First of all, we get into the vehicle and start the engine by turning the key to position two; then we move the gear lever to position D, lowering the gear lever downwards, as shown in the video. At this point, we move the gear lever to position N to put it in neutral, positioning the automatic transmission in position P to park the vehicle (also for turning off the vehicle).

Posted on 15 November 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Aixam All cars nowadays are equipped with a remote control key to open and close the vehicle, and the Aixam City is no exception. If we encounter difficult…
(Various brands) Aixam In this guide we will see the main instructions that will allow us to disassemble and replace the gearbox of the Aixam 50. First, we lift the vehicle…
(Various brands) Aixam The information outlined in this guide will allow us to access the fuse box and the diagram for the Aixam 400. First, let's open the car's hood and s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos