Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the external noise-reducing seal on the car windows

Model: (Various brands) Various
Part: Checks and maintenance

Today we will explain how to install the noise-reducing seal on the external windows of a vehicle. The seal should be purchased in a roll, so don't worry if it turns out to be longer because it can be cut with simple scissors. Using a plastic tool and a microfiber cloth, we clean the area before inserting the seal. We glue the first part of the seal and, using a plastic tool, we insert the entire seal inside the groove. We cut the excess, remove the glue, and press to make it adhere. We test the correct functioning of the window by opening and closing it.

Posted on 1 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to prevent car windows from fogging up?
How to prevent car windows from fogging up?
(Various brands) Various Condensation on windows forms due to the humidity and temperature difference inside and outside the vehicle. When the interior is warm, moisture cond…
How to fit an oil seal.
How to fit an oil seal.
(Various brands) Various In this guide we will see how to fit an oil seal. To start, we will have to extract the old ones. To perform this operation it is necessary to insert…
How to Replace the Windscreen
How to Replace the Windscreen
(Various brands) Various First, apply the complete seal to the new windscreen that has not yet been installed. Now, remove the external seal present on the windscreen install…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What does Hill holder unavailable" mean? Read answer
    • Vari - What does "Hill Holder Unavailable" mean? Read answer
    • Vari - Why is the Kymco Downtown 300i not starting? Read answer
    • Vari - How many km do you need to service the T-Max 530? Read answer

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos