Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
First apply the complete gasket to the new windshield that is not yet installed. Now remove the external gasket present on the windshield installed on the car and with the appropriate cutting tools you will have to cut the internal windshield gasket always working from the outside, also give a couple of passes with this tool. Now you will have to remove the lower part of the internal gasket by operating with an electric hammer with the spatula. Once this is done, all you have to do is lift the windshield, clean the parts where the gaskets of the new windshield will rest and remove all the remaining old glue. Now you will have to apply some new silicone and gently place the new windshield, making sure that it is in the correct position.
Posted on 21 September 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |